News

The newest LED Tape lighting technology has arrived at Prism – Lovo™Flex COB Tape Lighting. LovoFlex COB series uses enhanced LED design to create tape lights with a seamless, dot-free linear light. Chip-on-board (COB) technology allows for a higher density of LEDs for a brighter, more flexible and uniform illumination for any design. With no need for additional diffusers and a narrow 8mm width, LovoFlex COB tape is the lowest profile strip solution that can fit in applications with shallow clearance.

Amazing Features of LovoFlex COB Tape Lights

No More LED Hotspots

Hotspots have been the biggest eyesore in design applications. Not anymore With LovoFlex COB tape lighting, there are no hotspots, even in tight spaces. With 146 LEDs/Ft, it would be difficult to pick out any hotspots on the 3.1W/ft LovoFlex COB strips. The strip illuminates a smooth, consistent light from start to finish. This makes LovoFlex COB ideal for reflective surfaces such as granite countertops and tile floors, or narrow applications like jewellery cases and backlighting.

Shine Brighter

At 343 Lumens/ft (1125Lumens/M), LovoFlex COB 3.1w/ft strips are even brighter than our high-density strips! The consistent, bright light also emits at a wider angle thanks to the flip-chip LEDs not being encapsulated in a plastic holder like SMD LEDs. This lets them emit some light out the sides so that they spread at 180 degrees off the strip. A wider light angle means more light for you, so this is important in the long run for brightness as well!

Low Profile

With a narrow 8mm width, LovoFlex COB tape is the lowest profile strip solution that can fit in applications with shallow clearance.

More Flexibility

LovoFlex COB offers added flexibility to make it easier to fit into tight areas and turn around corners in your application. The flexibility of LovoFlex COB Tape lighting is much better than other flexible strips because of the smaller diode and even distribution of weight. This added flexibility makes it easier to fit the strips into tight areas and turn around corners in your design. The diodes are so small and tightly spaced that any point of the strip is the same as the other. The consistency makes it easy to set up strips without having to plan around a 5050 SMD LED sticking out where you don’t want it.x

A Color for Every Design

LovoFlex COB is available in standard white outputs for 1.5W/Ft and 3.1W/Ft in 2700K Ultra Warm, 3000K Warm White, 4000K Neutral White and 6000K Pure White. It’s also available in RGB at 4.6W/ft and can be controlled by a wireless remote, conventional dimming, WiFi/Bluetooth controller or by most apps.

Easy to Install

With LovoClear Connectors, all you must do is cut, connect, and power without having to solder. This makes it so you can cut strips to custom sizes or add gaps within the design of your project. Remember to only cut along cut lines with are marked on the strip.

Broaden your Designs

Expand your project design options with LovoFlex COB tape lighting. If your project requires:

• The strip itself cannot be hidden from sight.
• The surface that is being illuminated is within 2 feet of the strip light.
• Reflective surfaces such as granite countertops and tile floors
• narrow applications like jewellery cases and backlighting
• Creating a neon effect in your applications
• Shallow extrusion with no hotspots

then COB LovoFlex Tape light is your solution.

Are you ready to expand your design options with LovoFlex COB Tape Lighting?

Be one of the first to use the latest innovation in LED lighting! LovoFlex COB LED Tape lighting broadens your design offerings and create beautiful lighting effects for any project. Start by selecting the LovoFlex COB Tape lighting you need for your project:

1.5W/Ft LovoFlex COB                3.1W/Ft LovoFlex COB                RGB 4.6W/Ft LovoFlex COB